Maze of the Week #229 - The Great Sphinx

I’m going back to back iconic locations. Maze of the Week #229 features The Great Sphinx of Giza. This is my first maze of the week from Egypt, although I have done a maze of a certain famous King in the past. This is on my bucket list of places to visit, especially now that the GEM is open. We can’t be sure but it is believe that it was built sometime around 2,500 BC. Wild. I would love to see what it looked like when it was new. Check out this short video for historical information:

The maze: I did this in color and used shadows to give it more shape. The erosion of the stone made perfect walls to use to make a maze.

The Great Sphinx Maze

Download is available on the home page. Happy Maze-ing !

Other blog posts you may enjoy:

Into the Labyrinth (2020) Movie Review

I review any movie containing a maze or labyrinth. And there are some great maze movies that have been made ! But also there are movies that are the complete opposite. Today I will review Into the Labyrinth, or L'uomo del labirinto in Italian and see which list it fits into. The good news is this movie can usually be streamed for free on variety of websites. You can check the current availability using this link for justwatch ! If you are a reader you can also check out the 464 page book from Donato Carrisi that the movie is based on from Amazon, or better yet try to find it at your local bookseller / library.

Into the Labyrinth (2020) (IMDB)

Of all the movies I have reviewed this movie has the most different posters. Check out the 4 I found below: 3 of them have a mixture of labyrinth and maze imagery. They wanted to make a labyrinth - but ended making mazes. (Mazes fit into the story better).

Into the Labyrinth movie posters

First, I must say that we live in a world where we are constantly multitasking and electronic devices always want our attention. This is not a multitasking movie. You need to pay attention to the storyline and could easily get confused even if you do pay attention !

Into the Labyrinth is a thriller starring Dustin Hoffman. Should be good. The storyline follows an unfolding narrative that tries to explain how a missing woman, now recovering in a hospital came to be there after escaping her kidnapper. Who is that kidnapper, and what was their motivation ? Also, is that Donnie Darko on the movie poster (poster #1 & #3 above) ?

The story takes place in 2 different locales with 2 different sets of actors. Dustin, playing a doctor who is a profiler working with the woman in the hospital to find out what happened to her. She seems to have lost her memory and he is helping her recall what has happened to her. All of this happens in English. The other half of the movie shows a private investigation, done by a man name Genko, into the same case, all taking place in Italian. As the movie progresses new clues give us a variety of possible suspects. Tension builds. There is a weird rabbit story (the Donnie Darko reference I made earlier). The occult is introduced. Tension builds. and 75% of the way into it, the thing starts to show cracks. The story falls apart. Eventually things get tied up at the end, but the great start has already fizzled out. I’m not going to spoil any plot points, but there is a lot going on at the end (something reading the book could much easier explain).

So, what is the deal with the labyrinth ? Well, while the woman was kidnapped she was trapped in a dark stone labyrinth by her captor that included many locked doors. In order to get the supplies she needs she must solve a small 3D labyrinth/maze puzzle that has been left in her cell. Basically, her captor is a big fan of labyrinths.

Overall I give this a 5.5/10, but it had much more potential that was wasted.

SPOILERS: What happened at the end

There are 2 main twists in the movie Into the Labyrinth (2020):

  • The true identity of the kidnapped girl. Throughout the movie, we are led to believe that the woman in the hospital is Samantha Andretti, the girl who was kidnapped 15 years ago. However, in the final act, it is revealed that the woman in the hospital is actually Mila, a police officer who has been newly abducted and drugged.

  • 2 cases. Although presented as one case during the movie, these are 2 separate cases shown side by side. There are 2 serial kidnappers (at least) on the loose. Our labyrinth lover, “Dr. Green”, played by Dustin Hoffman and a series of “bunny” kidnappers who appear to be passing down the tradition as victims become perpetrators. Our final scene combines the stories as Genko and Dr Green meet in the bar.

When I look back I wonder why I thought there was 1 serial killer case when we had 2 languages being spoken….surely they were far away from each other location wise. Looking back the plot question becomes how did Genko and Dr Green meet in the bar at the end ? In hindsight this is movie that you might want to watch twice, despite my low initial rating once you understand the story structure.

After you have seen the movie and you wonder what exactly was going on I suggest you read this long and detailed explanation if my short summary wasn’t enough for you.

How to Make a 7 or 11 Circuit Diamond Labyrinth

In this post I will show you how to draw 2 different types of diamond labyrinths, a 7 and an 11 circuit version. I will also show you some alternative sizes and discuss what is possible, them show you a real world diamond shaped labyrinth. Here is what you can expect:

PART 1: HOW TO DRAW A 7 CIRCUIT LABYRINTH

PART 2: HOW TO DRAW A 7 CIRCUIT LABYRINTH (WITH GRIDS)

PART 3: HOW TO DRAW AN 11 CIRCUIT LABYRINTH (WITH GRIDS)

PART 4: OTHER VERSIONS + A REAL WORLD EXAMPLE

PART 1: HOW TO DRAW A 7 CIRCUIT LABYRINTH

Step 1 Draw 8 concentric diamonds

These will become your guides for the drawing of the labyrinth. Note that the number of circuits you want add one and that is how many concentric layers you need for any labyrinth creation.

PROTIP: Start your drawing with the center goal so you do not run out of room ! This also allows you to pick the size the center goal will be.

AESTHETIC CHOICE: For this example my diamond uses a square turned by 45 degrees. The 11 circuit diamond labyrinth will be made using a 2/3 grid (2 over, 3 up) giving it a sharp angle.

8 concentric diamonds

Step 1 - Draw 8 concentric diamonds

Step 2 Draw the outer wall, and pathway to the goal

At the 6 o’clock portion of the center diamond, draw a centered pathway to the edge, while keeping the right side open for the outer pathway on the right. Extend the left pathway to the edge and then create the outer wall all the way around the diamond, leaving only the entrance pathway open on the bottom left of the diamond and turning north until you reach the second inner diamond (this creates the entrance pathway).

AESTHETIC CHOICE: I decided to make this labyrinth using standard equal walls and pathways, but you can also use thinner lines if you want.

Making a 7 Circuit Diamond Labyrinth step 2

Step 2 Draw the outer wall, and pathway to the goal

Step 3 Begin the internal pathways

Continue the entrance pathway around the center goal, leaving the pathway open on the bottom right of the second center diamond. Using the third internal diamond draw a wall to create a second pathway from the center, stopping on the bottom left and leaving the pathway open for the turnback.

Take the right pathway from the center goal and continue it counterclockwise around the diamond, stopping to keep the pathway open on the bottom left of the diamond.

Making a 7 Circuit Diamond Labyrinth step 3

Step 3 Begin the internal pathways

Step 4,5 Continue drawing the internal pathways

In the center portion of the diamond, draw a turnback pathway in the next concentric diamond, creating a third pathway from the center goal. Keep the pathway open on the bottom right for a turnback the other way in the next step.

Making a 7 Circuit Diamond Labyrinth step 4

And draw the next layer back the other way.

Making a 7 Circuit Diamond Labyrinth step 5

Step 6 Finish the internal pathways

One last layer to draw to complete the labyrinth.

Making a 7 Circuit Diamond Labyrinth step 6

Step 7 Delete guides and make aesthetic changes

Delete your guidelines. You can change the widths now if you do not like how it looks. I changed the wall endings at the turn-backs to have curved ends, because I like how it looks.

7 Circuit Diamond Labyrinth

That concludes our instructions. Good luck in making your own design !

 

PART 2: HOW TO DRAW A 7 CIRCUIT LABYRINTH (WITH GRIDS)

For reference here is the labyrinth being made with the grids shown. You can see it being built by using the next control.

 

PART 3: HOW TO DRAW AN 11 CIRCUIT LABYRINTH (WITH GRIDS)

Step 1 Draw 12 concentric diamonds

These will become your guides for the drawing of the labyrinth. Note that the number of circuits you want, you need to add one and that is how many concentric layers you need for any labyrinth creation.

PROTIP: Start your drawing with the center goal so you do not run out of room !

AESTHETIC CHOICE: For this example my diamond was made using a 2/3 grid (2 over, 3 up) giving it a sharp angle. The 7 circuit uses a square turned by 45 degrees to create the diamond.

Step 2 Draw the outer wall, and pathway to the goal

At the 6 o’clock portion of the center diamond, draw a centered pathway to the edge, while keeping the right side open for the outer pathway on the right. Extend the left pathway to the edge and then create the outer wall all the way around the diamond, leaving only the entrance pathway open on the bottom left of the diamond. The distance should be equal to the width of the pathway that enters the center.

Steps 3 and forward create the internal pathways

Create one layer at time, working from the outside to the inside of the diamond. Build the labyrinth below in the gallery using the next control.

 

PART 4: OTHER VERSIONS + A REAL WORLD EXAMPLE
The diamond labyrinth is versatile. Odd circuit numbers are easily adapted based on the constructions above. Even circuits can be more tricky, but here is an example of a 2 and 3 circuit to give an idea of what is possible. The odd circuits versions use the long pathway to the center, while the even numbered versions use the immediate turn out of/into the center goal.

2 and 3 circuit Diamond Labyrinths

You could also create a spiral labyrinth in a diamond shape… but I am not how to tell the difference between a square an a diamond when the shape is a spiral. Seems like it depends on the direction you walk up to it from ?

As far as real world examples, there are not many to choose from, but I did find one:

  • The Stanwood City Hall Park Labyrinth in Stanwood, WA is a 5 circuit diamond version labyrinth painted on concrete. It’s a bit over 17 feet wide and open to the public !

Additional posts you might like:

US Labyrinths to visit by state

10 of the Most Frequently asked Questions about Labyrinths, with Answers

The 8 best books about mazes, labyrinths and their history

How to Make 20+ Different Digital Labyrinths

Weekly Hard Maze #19

Each Saturday I post a new hard maze with all of them sitting in the Hard Maze Archive. I will try to post a variety of maze types to keep things interesting.

Weekly Hard Maze #19 - Mega Dot Maze

Move from the S to the G. Solution will be in the archive. Download is below.

Weekly Hard Maze #19 - Mega Dot Maze

If you solved that maze quickly and want to try some of my archival hard mazes, these posts should do the trick: